No. 3VK, METALMAQ, NEW   Our stock number: 4016

OPTIONAL ACCESSORIES:
EVS Head, 3 HP,inverter motor with Yaskawa driver 60-5000 RPM. . . $ 1,600.00
NEWALL DP700 two axis digital readout (installed). . . . . . . . . $ 2,015.00
NEWALL DP700 three axis digital readout (installed). . . . . . . . 2,735.00
MITUTOYO digimatic quill kit (LED readout for spindle) . . . . . . 400.00
SERVO 150 lb power feed unit, longitudinal (installed) . . . . . . 1,200.00
SERVO 150 lb power feed unit, cross (installed) . . . . . . . . . 1,280.00
SERVO 140 lb power feed unit, knee vertical (installed). . . . . . 1,290.00
BESTLINE AL-500P power feed unit, longitudinal (installed) . . . . 750.00
BESTLINE AL-500P power feed unit, cross feed (installed) . . . . . 750.00
BESTLINE AL-500P power feed unit, vertical knee feed (installed) . 850.00

Coolant system (installed) . . . . . . . . . . . . . . . . . . . . 720.00
Chip pan (49" x 30" x 7.5"). . . . . . . . . . . . . . . . . . . . 180.00
Clamping kit (52 piece). . . . . . . . . . . . . . . . . . . . . . 120.00
R-8 collet set (11 piece, 1/8" to 3/4"). . . . . . . . . . . . . . 175.00
6" angle-lock milling vise . . . . . . . . . . . . . . . . . . . . 895.00
Swivel base for 6" vise. . . . . . . . . . . . . . . . . . . . . . 175.00
Horizontal milling attachment (not installed). . . . . . . . . . . 1,030.00
Mechanical air power draw bar (installed). . . . . . . . . . . . . 895.00
4" riser block . . . . . . . . . . . . . . . . . . . . . . . . . . 560.00

6" riser block . . . . . . . . . . . . . . . . . . . . . . . . . . 620.00
8" riser block . . . . . . . . . . . . . . . . . . . . . . . . . . 680.00
Mist Coolant installed . . . . . . . . . . . . . . . . . . . . . . 250.00
Quartz work light. . . . . . . . . . . . . . . . . . . . . . . . . 200.00
In-bound freight to Miami, FL (stock machine). . . . . . . . . . . 1,000.00

ELECTRICS: 220/440 volt, 3 phase, 60 Hz.

DELIVERY: From stock, subject to prior sale,



STANDARD ACCESSORIES:
ISO-9002 compliant, 3 HP spindle motor, One shot lubricator
Licensed Meehanite casting, Gear housing made of cast iron
Precision hardened & ground square ways--Y axis
Hardened and ground leadscrews--X & Y axes
Turcite-B on slideways, gibs and saddle slideways--X & Y axes
Spindle is made of SCM415 15 (SAE4115) chrome molybdenum alloy steel,
fully ly hardened and ground.
Rigid design of spindle automatic feed mechanism
Thrust bearing support on lead screws, Leveling pads,
Strict hand scraping (16 points per square inch)
Two year parts warranty (one year for consumables: ie motor, brake shoes,

springs, belts, bearings, electrical parts, pulleys, etc.)
Tool box, Way covers, One draw bar, Parts and operation manual

SPECIFICATIONS:
Size of table (length x width) 10" x 54" (250mm x 1370mm)
Table to spindle nose 3.3" - 21" (85-535mm)
Hardened & ground ways yes
Longitudinal travel 34" (870mm)
With power feed 30.5" (775mm)
Cross travel 16" (410mm)
Ram traverse 22" (562mm)
Vertical knee travel 17" (450mm)
Quill traverse 5" (127mm)
Quill power feed rate--number 3
--range (ipr) .0015/.003/.006
Spindle taper R-8
Main motor 3 HP
Head moves right to left 90 degrees
Head tilts front to back 45 degrees
Spindle speeds--number infinitely variable
--range 60-4500 rpm
Net weight (approx.) 3,360 lbs. (1500 kgs)
Dimensions (L x W x H) 83.5" x 72.4" x 90"
(2120mm x 1840mm x 2262mm)


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page