No. 3VS, METALMAQ, new   Our stock number: 4017

NST #40 spindle in lieu of stanrad spindle. . . . . . . . . . . . . $ 1,000.00
EVS head 3 HP inverter motor with Yaskawa driver, 60 to 5000 rpm. . 1,600.00
49" table in lieu of standard 42" table . . . . . . . . . . . . . . 400.00
NEWALL DP700 two axis digital readout system (installed). . . . . . 2,015.00
NEWALL DP700 three axis digital readout system (installed). . . . . 2,735.00
MITUTOYO digimatic quill kit (LED readout for spindle). . . . . . . 400.00
SERVO 150 lb power feed unit, longitudinal (installed). . . . . . . 1,200.00
SERVO 150 lb power feed unit, cross feed (installed). . . . . . . . 1,280.00
SERVO 140 lb power feed unit, vertical knee feed (Installed). . . . 1,250.00
BESTLINE AL-500P power feed unit, longitudinal (installed). . . . . 750.00
BESTLINE AL-500P power feed unit, cross (installed) . . . . . . . . 750.00
BESTLINE AL-500P power feed unit, knee vert (installed) . . . . . . 750.00
12" rotary table (vertical & horizontal). . . . . . . . . . . . . . 1,250.00
Coolant system (installed). . . . . . . . . . . . . . . . . . . . . 720.00
Chip pan (49" x 30" x 7.5") . . . . . . . . . . . . . . . . . . . . 295.00
Clamping kit (52 piece) . . . . . . . . . . . . . . . . . . . . . . 120.00
R-8 collet set (11 piece, 1/8" to 3/4") . . . . . . . . . . . . . . 175.00
KURT 6" anglock swivel base vise, 8" opening. . . . . . . . . . . . 895.00
6" angle-lock milling vise. . . . . . . . . . . . . . . . . . . . . 405.00
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . . 175.00
Horizontal milling attachment (not installed) . . . . . . . . . . . 1,030.00
Mechanical air power draw bar (installed) . . . . . . . . . . . . . 895.00
T-slot cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40.00
4" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 560.00
6" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 620.00
In-bound freight to Miami, FL (stock machine) . . . . . . . . . . . 1,200.00

ELECTRICS: 220/440 volt, 3 phase, 60 Hz.
DELIVERY: From stock, subject to prior sale

STANDARD ACCESSORIES:
ISO-9002 compliant, 3 HP spindle motor, One shot lubricator
Licensed Meehanite casting, Gear housing made of cast iron
Precision hardened & ground dovetail ways--Y & Z axes
Hardened and ground leadscrews--X & Y axes
Turcite-B on slideways, gibs and saddle slideways--X & Y axes
Spindle is made of SCM415 (SAE4115) chrome molybdenum alloy steel,
fully hardened and ground.
Rigid design of spindle automatic feed mechanism
Thrust bearing support on lead screws, Leveling pads,
Strict hand scraping (16 points per square inch)
Two year parts warranty (one year for consumables: ie motor, brake shoes,

springs, belts, bearings, electrical parts, pulleys, etc.)
Tool box, Way covers, One draw bar, Parts and operation manual

SPECIFICATIONS:
Size of table--standard 9" x 42" (230mm x 1067mm)
--optional 9" x 49" (230mm x 1225mm)
Hardened & ground ways yes
Longitudinal travel 30" (762mm)
Cross travel 12" (305mm)
Ram traverse 14" (356mm)
Vertical knee travel 16" (400mm)
Quill traverse 5" (127mm)
Quill power feed rate--number 3
--range (ipr) .0015/.003/.006
Spindle taper R-8
Main motor 3 HP
Head moves right to left 90 degrees
Head tilts front to back 45 degrees
Spindle speeds--number infinitely variable
--range 60 to 4,500 rpm
Net weight (approx.) 2,200 lbs. (950 kgs)
Dimensions (L x W x H) 64" x 59" x 84"
(1618mm x 1497mm x 2140mm)


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page