No. 5VKH (SP520VS) METALMAQ, 5 HP, 11" x 54", Z-axis motor, NEW   Our stock number: 5080

OPTIONAL ACCESSORIES:
NEWALL C80 two axis digital readout (installed) . . . . . . . . . . $ 1,920.00
NEWALL C80 three axis digital readout (inst'd). . . . . . . . . . . 2,535.00
MITUTOYO digimatic quill kit (LED readout for spindle-installed). . 400.00
SERVO 150 lb power feed unit, longitudinal (installed). . . . . . . 860.00
ALIGN model AL250 150 lb power feed unit, longitudinal (installed). 600.00
SERVO 150 lb power feed unit, cross (installed) . . . . . . . . . . 1,180.00
ALIGN model AL250 150 lb power feed unit, cross (installed) . . . . 750.00
Coolant system (installed). . . . . . . . . . . . . . . . . . . . . 620.00
Chip pan (49" x 30" x 7.5") . . . . . . . . . . . . . . . . . . . . 295.00
Clamping kit (52 piece) . . . . . . . . . . . . . . . . . . . . . . 95.00
Tilting head (front to rear). . . . . . . . . . . . . . . . . . . . 350.00
6" angle-lock milling vise. . . . . . . . . . . . . . . . . . . . . 405.00
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . . 175.00
Quartz worklight. . . . . . . . . . . . . . . . . . . . . . . . . . 160.00
Horizontal milling attachment (not installed) . . . . . . . . . . . 1,030.00
Mechanical air power draw bar (not installed) . . . . . . . . . . . 700.00
Kurt air power draw bar (not installed) . . . . . . . . . . . . . . 825.00

6" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 580.00
8" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 605.00
EVS head ith 5HP inverter motor and Yaskawa driver, 5000 rpm. . . . 2,000.00
58" table in lieu of 54" table. . . . . . . . . . . . . . . . . . . 695.00

ELECTRICS: 220/440 volt, 3 phase, 60 Hz.
DELIVERY: From stock, subject to prior sale, CA.. . . . . . . . . . 1,500.00

STANDARD ACCESSORIES:
ISO-9002 compliant, 5 HP spindle motor
Licensed Meehanite casting, Gear housing made of cast iron
Precision hardened & ground square ways--Y & Z axes
Hardened and ground leadscrews--X & Y axes
Turcite-B on slideways, gibs and saddle slideways--X & Y axes
Spindle is made of SCM415 (SAE4115) chrome molybdenum alloy steel,
fully hardened and ground.
Rigid design of spindle automatic feed mechanism
Thrust bearing support on lead screws, Leveling pads,
Strict hand scraping (16 points per square inch)
Two year parts warranty (one year for consumables: ie motor, brake shoes,

springs, belts, bearings, electrical parts, pulleys, etc.)
Tool box, Way covers, One draw bar, Parts and operations manual
1/2 HP knee elevating motor, Lubrication system

SPECIFICATIONS:
Size of table--standard (length x width) 11" x 54" (280mm x 1370mm)
--optional (length x width) 11" x 58" (280mm x 1460mm)
Table load capacity 1000 lbs.
Hardened & ground ways yes
Longitudinal travel 33" (836mm)
Cross travel 16" (410mm)
Ram traverse 22" (562mm)
Vertical knee travel 17" (450mm)
Quill traverse 5" (127mm)
Quill power feed rd rate--number 3
--range (ipr) .0015/.003/.006
Spindle taper NST # 40
Main motor 5 HP
Head moves right to left 90 degrees
Head tilts front to back Optional
Spindle speeds--number infinitely variable
--range 60-4300 rpm
Net weight (approx.) 3,500 lbs. (1600 kgs)
Dimensions (L x W x H) 84" x 70" x 94"
(2120mm x 1790mm x 2375mm)




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page