A M Metalmaq Inc
English Spanish French German Chinese (Simplified)

EDWARDS 100 Ton Ironworker, NEW   Our stock number: 4021

EDWARDS 100 Ton Ironworker, NEW

10" throat and standard accessories which include 6" x 6" angle
iron blades, 14" bar shear blade, one standard round punch and die
and 5 HP 1725 rpm motor wired for 220/3/60 ro 440/3/60 electrics


STANDARD FEATURES:
Complete punch system
Punch stripper
Fully guarded
Remote foot pedal operation
Reversible shear blades for extended life
Low rake angle on shear blades
Fast adjusting holddown bars
Direct drive pump
Hydraulic system charged and ready to operate
Sound insulated
Tray for cut stock
Integral lifting lug for instant portability

OPTIONAL ACCESSORIES:

Special voltage . . . . . . . . . . . . . . . . . . . . . . . . . . $ 300.00
Auto cut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750.00
Electronic stroke limiter (allows you to set the upper and lower
stroke limits) . . . . . . . . . . . . . POR
Greaseless gibs/slides. . . . . . . . . . . . . . . . . . . . . . . POR

Quick change punch coupling--factory installed at time of purchase
of machine . . . . . . . . . . . . . . 622.00
Vee notcher 3" x 3" x 1/4". . . . . . . . . . . . . . . . . . . . . 1,086.00

Rectangular coper--2-1/2" w x 6" l x 1/2" thick . . . . . . . . . . 1,315.00

Rod shear and housing--1/4", 3/8", 1/2", 5/8". 3/4" & 1". . . . . . 1,270.00
12" brake attachment w/4 way die with 1/16", 1/8", 3/16" & 1/4" vees 1,215.00
Oversized punch assembly--to 1-9/16" round. . . . . . . . . . . . . 578.00
Pipe notcher housing (to be used with 1/2" to 2" notching dies) . . 347.00
1/2" pipe notching dies . . . . . . . . . . . . . . . . . . 391.00
3/4" pipe notching dies . . . . . . . . . . . . . . . . . . 420.00
1" pipe notching dies. . . . . . . . . . . . . . . . . . . 448.00
1-1/4" pipe notchinging dies. . . . . . . . . . . . . . . . 478.00
1-1/2" pipe notching dies . . . . . . . . . . . . . . . . . 508.00
2" pipe pe notching dies. . . . . . . . . . . . . . . . . 536.00
Pedestal die table for standard punches . . . . . . . . . . . . . . 392.00
Pedestal die table for oversized punches. . . . . . . . . . . . . . 462.00
Back gauge--up to 48" . . . . . . . . . . . . . . . . . . . . . . . 231.00
Punch gauging table, 16" x 12" for use with standard punches. . . . 636.00
Punch gauging table, 16" x 12" for use with oversized punches . . . 693.00
Short fence--2 handles. . . . . . . . . . . . . . . . . . . . . . . 42.00
Long fence---2 handles. . . . . . . . . . . . . . . . . . . . . . . 50.00
Magnetic squaring arm . . . . . . . . . . . . . . . . . . . . . . . 81.00
Inbound freight from factory to our warehouse--stock machines . . . 1,000.00
Export crating. . . . . . . . . . . . . . . . . . . . . . . . . . . 1,000.00

STANDARD PUNCH & DIE SETS:
Punch & die starter box (8 sets from 3/16" to 1-1/16"). . . . . . . 303.00
Round punch & die set--1/8" to 1-1/16"--per set . . . . . . . . . . 31.00
Square punch & die set--up to 3/4"--per set . . . . . . . . . . . . 116.00
Oblong punch & die set--up to 1-1/16" long--per set . . . . . . . . 132.00
Hex punch & die set---up to 29/32"--per set . . . . . . . . . . . . 196.00
Rectangular punch & die set--up to 5/8" x 7/8"--per set . . . . . . 266.00

OVERSIZE PUNCH & DIE SETS:
Round punch & die sets up to 1-9/16"--per set . . . . . . . . . . . 61.00
Square punch & die sets up to 1-1/16"--per set. . . . . . . . . . . 193.00
Oblong punch & die sets up to 1-1/2"--per set . . . . . . . . . . . 227.00
Hex punch & die set up to 1-1/4"--per set . . . . . . . . . . . . . 266.00


SPECIFICATIONS:
PUNCH STATION:
Tonnage 100
Throat 10"
Capacity 1-1/16" hole thru 1" plate
Largest punch accepted with
--standard punch holder 1-1/16"
--oversized punch holder 1-9/16"
Largest die accepted with
--standard die holder 1-1/8"
--oversized die holder 1-5/8"
Open height 8-5/8"
Shut height 6-3/4"
Stroke 1-7/8"

BAR SHEAR
Maximum cutting length 14"
Cutting capacity--maximum width 3/4" x 14"
--maximum thickness 1" x 10"
Maximum bar shearing--round 1-1/4"

ANGLE SHEAR
Maximum angle @ 90 degree 6" x 6" x 1/2"

RECTANGULAR COPER (Optional)
Maximum cut 2-1/2" x 6" x 1/2"

92 DEGREE NOTCHER (Optional)
Maximum cut 3" x 3" x 1/4"

MOTOR & ELECTRICS
Motor power 5 HP
Electrics--standard 208-220/3/60

DIMENSIONS
Base dimensinsions 43" x 43" square
Overall height 62"
Net weight 3,850 lbs


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page