HWACHEON, HI-ECO45, FANUC 18T, 31.5"x80", 5.2"B, 15"Chk, 50HP, TS, CC, 2001   Our stock number: 6784

HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001

Click on picture below for larger version
HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001
HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001HWACHEON, HI-ECO45, FANUC 18T, 31.5 x80 , 5.2 B, 15 Chk, 50HP, TS, CC, 2001

Model number HI-ECO45
Year of manufacture 2001

SPECIFICATIONS:
Chuck size 15"
Maximum swing 31.5" (800mm)
Maximum cutting diameter 24.8" (630mm)
Maximum machining length 78.7" (2000mm)
Number of tools on turret 12
Feed rates--rapid--X/Z 945 ipm
Spindle nose type ASA. A2-11"
Spindle bore 5.2" (132mm)
Bar size 4.6" (117mm)
Tailstock quill diameter 5.9" (150mm)
Tailstock quill stroke 5.9" (150mm)
Quill nose taper MT No. 5
Spindle drive motor 50 HP
Electrics 220/440/3/60 HZ
Spindle speed range 20-1800 RPM
Floor space with conveyor 241" X 89" X 100"
Gross weight 33,000 lbs.

EQUIPPED WITH:
Kitagawa 15" 3 jaw hydraulic power chuck, model B-15
Programmable tailstock, Geared transmission, Remote foot pedals
RS232 port interface, 45 degrees slant bed
Coolant system with pump, All available manauls
Assorted tooling and holders, Set of levelling pads
Turbo Systems #6272-8403 chip conveyor


PRELIMINARY SPECIFICATIONS ARE SUBJECT TO CORRECTION.


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page