A M Metalmaq Inc
English Spanish French German Chinese (Simplified)

No. KTM-4VKFe, KENT USA, inverter drivle, R-8, 3 HP NEW   Our stock number: 7002

OPTIONAL ACCESSORIES:
NEWALL DP700 two (2) axis digital readout (installed) . . . . . . . 2,100.00
NEWALL C80 three (3) axis digital readout (installed) . . . . . . . 2,800.00
MITUTOYO digimatic quill kit (LED readout for spindle). . . . . . . 500.00
ALIGN model AL250 150 lb power feed unit, longitudinal (installed). 750.00
ALIGN model AL250 150 lb power feed unit, cross (installed) . . . . 850.00
ALIGN model AL250 150 lb power feed unit, knee vert (installed) . . 850.00
12" rotary table (vertical & horizontal). . . . . . . . . . . . . . 1,250.00
Coolant system (installed). . . . . . . . . . . . . . . . . . . . . 750.00
Chip pan (49" x 30" x 7.5") . . . . . . . . . . . . . . . . . . . . 500.00
Clamping kit (52 piece) . . . . . . . . . . . . . . . . . . . . . . 120.00
R-8 collet set (11 piece, 1/8" to 3/4") . . . . . . . . . . . . . . 155.00
6" angle-lock milling vise. . . . . . . . . . . . . . . . . . . . . 550.00
Horizontal milling attachment (not installed) . . . . . . . . . . . 1,030.00
Automatic air power draw bar (not installed). . . . . . . . . . . . 895.00
T-slot cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40.00
6" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 600.00
8" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 700.00
Optional 440V electrics for inverter drive. . . . . . . . . . . . . 200.00
In-bound freight to Miami, FL (stock machine) . . . . . . . . . . . 1,200.00

ELECTRICS: 220 volt, 3 phase, 60 Hz.

STANDARD ACCESSORIES:
3 HP spindle motor, 50 - 4500 rpm variable speed milling head with
AC-Freq drive
Digital spindle RPM display and real-time LED spindle load indicator bar
Auto spindle direction matching when switching between High/Low gear range
Extra-wide 12" x 50" table, hardened and ground for long-lasting performances
T-slots ground parallel to table ways for easy and precise set ups
Saddle and knee with hardened and ground sqaure (box) ways
Precision ground lead screws with backlash compensating double nuts
Meehanite casting with built in coolant reservoir in machine base
Automatic centralized one-shot lubrication, with metered check-valves

SPECIFICATIONS:
Size of table (length x width) 12" x 50"
Longitudinal travel (X-axis) 33"
Cross travel (Y-axis) 17.5"
Vertical knee travel (Z-axis) 17.5"
Ram traverse 22
Table load capacity 850 lbs (distributed)
Quill traverse 5.5"
Quill diameter 3.375"
Quill power feed rate--number 3
--range (ipr) .0015/.003/.006
Spindle taper R-8
Main motor 3 HP
Head moves right to left 90 degrees
Head tilts front to back 45 degrees
Spindle speeds--number infinitely variable
--range--low 50 to 550 rpm
--high 550 to 4500 rpm
Net weight (approx.) 3,400 lbs.
Dimensions (L x W x H) 72" x 72" x 88"


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page